Inverex Nitrox 10kW SP-5G Hybrid Solar Inverter
Everything You Need to Know
Clear product details, technical specifications, warranty information and professional installation guidance.
Inverex Nitrox 10kW SP-5G Hybrid Solar Inverter
Verified technical specifications
Battery input
| Specification | Value | Status |
|---|---|---|
| Battery type | Lead-acid or lithium-ion | Supplied datasheet |
| Battery voltage range | 40ā60V | Supplied datasheet |
| Nominal battery class | 48V | Derived from the verified 40ā60V range and product designation |
| Maximum charging current | 210A | Supplied datasheet + official product page |
| Maximum discharging current | 210A | Supplied datasheet + official product page |
| Lithium-ion charging strategy | Self-adaption to BMS | Supplied datasheet |
| Number of battery inputs | 1 | Supplied datasheet |
PV input
| Specification | Value | Status |
|---|---|---|
| Maximum PV input power | 16,000W | Supplied datasheet + corroborating product pages |
| Maximum PV input voltage | 500V | Supplied datasheet + corroborating product pages |
| Start-up voltage | 125V | Supplied datasheet |
| MPPT voltage range | 150ā425V | Supplied datasheet + corroborating product pages |
| Rated PV input voltage | 370V | Supplied datasheet |
| Maximum operating PV input current | 32A + 32A | Supplied datasheet |
| Maximum PV short-circuit current | 48A + 48A | Supplied datasheet |
| Number of MPPT trackers | 2 | Supplied datasheet + corroborating product pages |
| PV strings | Two strings per MPPT (2+2) | Datasheet formatting is shown as 2/2+2; corroborating listing states 2+2 |
AC input and output
| Specification | Value | Status |
|---|---|---|
| Rated AC input/output active power | 10,000W | Supplied datasheet |
| Maximum AC input/output apparent power | 11,000VA | Supplied datasheet |
| Rated AC input/output current | 45.5A / 43.5A | Supplied datasheet |
| Maximum AC input/output current | 50A / 47.9A | Supplied datasheet |
| Maximum continuous AC pass-through | 50A | Supplied datasheet |
| Peak off-grid power | 2Ć rated power for 10 seconds | Supplied datasheet |
| Power-factor adjustment | 0.8 leading to 0.8 lagging | Supplied datasheet |
| Rated AC voltage | 220/230V | Supplied datasheet |
| AC operating range | 0.85ā1.1 Un | Supplied datasheet |
| Grid frequency / range | 50Hz: 45ā55Hz; 60Hz: 55ā65Hz | Supplied datasheet |
| Grid connection | L + N + PE | Supplied datasheet |
| THDi | <3% at nominal power | Supplied datasheet |
| DC injection current | <0.5% In | Supplied datasheet |
Efficiency, protection and general data
| Specification | Value | Status |
|---|---|---|
| Maximum efficiency | 97.6% | Supplied datasheet + corroborating product pages |
| Euro efficiency | 96.5% | Supplied datasheet |
| MPPT efficiency | >99% | Supplied datasheet |
| DC surge protection | Type II | Supplied datasheet |
| AC surge protection | Type II | Supplied datasheet |
| Communication | RS485 / RS232 / CAN | Supplied datasheet |
| Optional monitoring | GPRS / WiFi / Bluetooth / 4G / LAN | Supplied datasheet; optional |
| Operating temperature | -40°C to +60°C; derating above +45°C | Supplied datasheet |
| Ambient humidity | 0ā100% | Supplied datasheet |
| Permissible altitude | 2,000m | Supplied datasheet |
| Noise | <30dB | Supplied datasheet |
| Ingress protection | IP65 | Supplied datasheet + official product page |
| Topology | Non-isolated | Supplied datasheet |
| Overvoltage category | OVC II (DC), OVC III (AC) | Supplied datasheet |
| Dimensions (W Ć H Ć D) | 343 Ć 580 Ć 258mm | Excluding connectors and brackets |
| Weight | 25.2kg | Supplied datasheet + corroborating product pages |
| Cooling | Intelligent air cooling | Supplied datasheet |
| Warranty | 5 years | Manufacturer-stated; subject to policy, installation and site conditions |
| Parallel operation | Up to 16 units | Official Inverex product page; system design required |
Integrated protections
- DC polarity reverse protection
- AC output overcurrent protection
- Thermal protection
- AC output overvoltage protection
- AC output short-circuit protection
- DC component monitoring
- Overvoltage load-drop protection
- Ground-fault current monitoring
- Power-network monitoring
- Island-protection monitoring
- Earth-fault detection
- DC input switch
- DC-terminal insulation-impedance monitoring
- Residual-current detection
- AC fault-circuit interrupter: optional according to supplied datasheet
Standards shown on supplied datasheet
- Grid: IEC 61727, IEC 62116, CEI 0-21, EN 50549, NRS 097, RD 140, UNE 217002, OVE-Richtlinie R25, G99 and VDE-AR-N 4105
- Safety / EMC: IEC/EN 61000-6-1/2/3/4, IEC/EN 62109-1 and IEC/EN 62109-2
Certification applicability can vary by firmware, market and installation. Confirm local grid approval before purchase.
What's in the box
- Inverex Nitrox 10kW SP-5G hybrid inverter
- Other accessories and documentation: Not Verified
Information not verified
- Retail price and current stock
- Exact accessories supplied in the box
- Battery brand/model compatibility for the buyer's system
- Included communication dongle; monitoring methods are listed as optional
- Installation, cabling, protection and commissioning scope
- Warranty claim procedure and exclusions
Technical Specifications
Specifications can vary by model or selected variant. Confirm final details before ordering.
Reliable Product Protection
Warranty availability can depend on the product, manufacturer and purchase conditions. Keep your invoice and product documentation.
Original products supplied through trusted distribution channels.
Our team can guide you regarding available product support.
Products are prepared carefully for safer transportation.
Professional Installation Guide
Inspect the Site
Confirm compatibility, location requirements and installation conditions.
Secure Installation
Mount the product securely according to manufacturer guidance.
Complete Connections
Connect the required solar, battery and electrical wiring safely.
Test the System
Verify configuration, protection and system performance before use.
Electrical and solar equipment should be installed by a qualified technician according to manufacturer instructions and local safety requirements.
Recommended Applications
Add the Applications metafield for product-specific use cases.
What You Receive
Add the Package Includes metafield for product-specific box contents.