GoodWe ES Uniq GW10K-ES-C10 10kW Single-Phase Hybrid Solar Inverter

The GoodWe ES Uniq GW10K-ES-C10 is a 10kW single-phase low-voltage hybrid inverter designed for residential solar and energy-storage systems. It supports up to 20kW PV input, 48V lithium-ion or lead-acid batteries, 200A continuous charging/discharging, dual MPPTs, IP66 protection and seamless backup switching in less than 4ms.

Key Features

• 10kW nominal single-phase AC output
• Up to 20kW maximum PV input
• 200% PV oversizing capability
• Two independent MPPT trackers with two strings per MPPT
• 600V maximum PV input voltage
• 48V nominal low-voltage battery system
• Compatible with supported lithium-ion and lead-acid batteries
• 200A maximum continuous battery charge/discharge current
• 10kW maximum battery charging power
• 11kW maximum battery discharging power
• 10kVA nominal backup output
• Up to 20kVA backup surge output for 10 seconds
• Backup switching in less than 4ms
• Parallel operation of up to 6 inverters
• Generator, smart-load and on-grid-inverter integration through a 3-in-1 port
• Micro-grid operation support
• Maximum efficiency up to 97.6%
• LCD plus WLAN/app monitoring
• Wi-Fi, LAN and Bluetooth communication support
• IP66 ingress protection
• Optional AI-driven AFCI and rapid shutdown

Technical Specifications

Battery Input

PV Input

AC Output — On-Grid

AC Output — Backup

Generator Input

Efficiency

Construction and Operating Data

Integrated Protection

• PV string current monitoring
• PV insulation-resistance detection
• Residual-current monitoring
• PV reverse-polarity protection
• Anti-islanding protection
• AC overcurrent protection
• AC short-circuit protection
• AC overvoltage protection
• Integrated DC switch
• Type III DC surge protection
• Type III AC surge protection
• Integrated remote shutdown
• Optional AFCI
• Optional rapid shutdown

Detailed Product Description

The GoodWe ES Uniq GW10K-ES-C10 combines solar generation, low-voltage battery storage, grid power, backup loads and generator integration in one residential energy platform. Its 10kW nominal single-phase output is suitable for larger homes and other compatible installations where reliable backup and high PV utilization are required.

The inverter accepts up to 20kW of PV input, providing 200% PV oversizing relative to its nominal AC rating. Two MPPT trackers and four total string inputs help system designers divide arrays across different roof orientations or operating conditions while staying within the published voltage and current limits.

On the battery side, the GW10K-ES-C10 operates with a 48V nominal battery system and supports up to 200A continuous charging and discharging. It provides up to 10kW charging power and 11kW discharging power when operating conditions and the selected compatible battery allow.

During an outage, the inverter can switch to backup in less than 4ms. Its backup output is rated at 10kVA nominal, can supply up to 11kVA continuously without the grid and can deliver up to 20kVA for 10 seconds to assist with short startup surges. Actual load performance depends on battery capability, temperature, configuration and system design.

The ES Uniq platform also supports generator input, smart-load control, micro-grid operation and parallel expansion of up to six compatible units. IP66 protection, integrated electrical safeguards and remote monitoring make it suitable for professionally designed indoor or outdoor residential installations.

Battery Compatibility

Use only batteries listed in the latest GoodWe compatibility documentation or batteries approved by GoodWe for the applicable market and firmware. The inverter supports compatible lithium-ion and lead-acid batteries within its published 40–60V operating range.

GoodWe's current solution documentation includes compatible configurations using selected Lynx A, Lynx U and GoodWe low-voltage battery models. Battery quantity, maximum parallel clusters, BMS protocol and cable requirements vary by model.

Always confirm the exact battery model, BMS compatibility, firmware and recommended configuration before sale or installation.

Package Contents

• 1 × GoodWe GW10K-ES-C10 hybrid inverter
• Wall-mounting bracket and standard mounting hardware, as supplied
• Communication/monitoring accessory supplied with the selected package
• Connection accessories supplied by the distributor
• User documentation / quick installation guide

Exact smart meter, CT, Wi-Fi/LAN module, connectors and accessories may vary by market and distributor. Confirm box contents before publishing.

Installation and Safety Notes

• Installation and commissioning must be completed by a qualified solar/electrical technician.
• Confirm PV string voltage and current remain within all inverter limits under expected weather conditions.
• Use correctly rated PV, battery, AC, generator and backup protection, cabling, earthing and isolation equipment.
• Follow the latest GoodWe manual, approved battery list and local grid-code requirements.
• Optional AFCI, rapid shutdown and communication functions depend on the ordered configuration and accessories.
• Output limits and grid settings may vary by country or applicable grid code.