Solar Stand L3 14 Gauge 1.5-Inch C-Type

Product Identity

Short Description

L3 elevated solar-panel mounting stand in a seller-specified 14-gauge, 1.5-inch C-type lipped-channel format. The supplied layout uses long inclined rails, separate upright support legs and base plates. Confirm exact member lengths, panel quantity, compatibility, included hardware and site-specific structural requirements before ordering.

Full Product Description

The Solar Stand L3 is an elevated mounting structure with long inclined panel-support rails, separate upright/rear legs, base plates and connecting support members. This listing is specifically for the seller-provided 14 gauge, 1.5 inch C-type version.

The C-type profile has a squared channel body with an open side and short inward return lips. It is different from the plain U-type open channel and should not be mixed or substituted without confirming the mounting geometry, fasteners and installation design.

The supplied references show different installed panel layouts on the same general extended-rail concept. Therefore, panel quantity is not claimed as a fixed L3 specification. Exact member lengths, steel grade, coating specification, installation-angle range, complete hardware list, supported panel dimensions, wind rating and structural load capacity remain Not Verified because no exact manufacturer datasheet was supplied or found.

Professional installation and a site-specific structural assessment are recommended. The installer must confirm substrate strength, anchors, fastener torque, corrosion conditions and local requirements.

Shopify HTML Description

<p><strong>Solar Stand L3 14 Gauge 1.5-Inch C-Type</strong> is an elevated solar mounting structure with extended inclined rails and separate upright support legs.</p>
<ul>
  <li>Seller-specified L3 configuration</li>
  <li>Seller-specified 14-gauge profile</li>
  <li>Seller-specified 1.5-inch C-type lipped channel</li>
  <li>Extended perforated rails, upright legs, base plates and bolted joints</li>
</ul>
<p><strong>C-type distinction:</strong> the channel has short inward return lips and is different from a plain U-type open profile.</p>
<p><strong>Verification required:</strong> exact lengths, material grade, coating standard, included hardware, panel compatibility, load rating, wind rating and warranty are not verified. Confirm the complete specification and obtain a site-specific structural assessment before installation.</p>

Specifications

Installation and Safety Notes

• Confirm every member length and the complete bill of materials before installation.

• Match the structure to actual panel-frame dimensions and approved clamping zones.

• Do not infer safe load or wind performance from gauge and channel width alone.

• Select anchors and fasteners for the actual roof or foundation substrate.

• Obtain a structural check for local wind, snow, corrosion and seismic conditions where applicable.

• Installation should be completed by a qualified solar mounting professional.