Solar Stand L1 14 Gauge 1.5-Inch C-Type

Product Identity

Short Description

L1 solar-panel mounting stand in a seller-specified 14-gauge, 1.5-inch C-type lipped-channel format. Supplied as a paired triangular support arrangement for a one-panel mounting format. Confirm all member lengths, included hardware, panel compatibility and site-specific load requirements before ordering or installation.

Full Product Description

The Solar Stand L1 is a paired triangular mounting structure intended for a one-panel solar mounting format. This listing is specifically for the seller-provided 14 gauge, 1.5 inch C-type version.

The C-type profile has short inward return lips at the open side of the channel. It is a separate profile from the plain U-type version and should not be substituted without confirming the required mounting geometry and hardware.

The reference images show perforated metal members, adjustable bolted joints and a paired triangular arrangement. Exact member lengths, steel grade, coating specification, installation angle range, fastener list, panel-size limits, wind rating and structural load capacity were not supported by an exact manufacturer datasheet and remain Not Verified.

Professional installation and a site-specific structural check are recommended. The installer must confirm substrate strength, anchors, fastener torque, corrosion conditions and compliance with local requirements.

Shopify HTML Description

<p><strong>Solar Stand L1 14 Gauge 1.5-Inch C-Type</strong> is a paired triangular mounting structure for a one-panel solar mounting format.</p>
<ul>
  <li>Seller-specified L1 configuration</li>
  <li>Seller-specified 14-gauge profile</li>
  <li>Seller-specified 1.5-inch C-type lipped channel</li>
  <li>Perforated members with adjustable bolted joints shown in the supplied reference</li>
</ul>
<p><strong>C-type distinction:</strong> the profile has inward return lips and is different from the plain U-type version.</p>
<p><strong>Verification required:</strong> exact lengths, material grade, coating standard, included hardware, panel compatibility, load rating, wind rating and warranty are not verified. Confirm the complete specification and obtain a site-specific structural assessment before purchase or installation.</p>

Specifications

Installation and Safety Notes

• Confirm the complete bill of materials and every member length before installation.

• Do not infer a safe load or wind rating from gauge or channel width alone.

• Use anchors and fasteners selected for the actual roof or foundation substrate.

• Confirm panel-frame dimensions and approved clamping zones.

• Have the structure checked for local wind, snow, corrosion and seismic conditions where applicable.

• Installation should be completed by a qualified solar mounting professional.